Airpol Engineering Ltd - Products - AirPol 'CycloJet' Filters

The AirPol range of CycloJet Filters are especially designed for handling large volumes of wood by-product from joinery shops, kitchen and joinery manufacturers etc.

This type of filter incorporates the large waste volume handling capacity of a cyclone with the efficiency of a filter, all within a small foot print.

The filter has a volute inlet which results in up to 95% cleaning of the air stream by means of centrifugal separation. An inner perforated thimble ensures that upward velocities are kept to a minimum maximising bag life.

The filter if fitted with automatic pulse jet cleaning which is controlled by the pressure drop of the filter and ensures minimum compressed air usage, and a number of high efficiency polyester filter bags give dust concentrations in the filtered air stream of less than 0.1 mg/m3.

The filter bags are housed in a weatherproof mild steel case, strengthened with angle sections, and fitted with explosion relief panels in accordance with the ATEX Directive.

Low maintenance is delivered as standard, with few moving parts.

The separated dust would be discharged from the filter hopper via a Rotary Airlock for subsequent disposal directly to skip, pneumatic conveying system to skip or silo or other storage facility.

The filter would be complete with support legs, access ladder and platforms, and would be finished 1-coat primer, 1-finish coat to BS colour.

Airpol Engineering - Dust and Fume Control engineers. Manufactures of reverse jet and reverse air flow filters, cyclones, fans and associated equipment. LEV readings undertaken and advice on exsisting equipment